A scan-to-CAD acceptance checklist defines how you will judge a reconstructed model before putting it into design or manufacture. Opening the file successfully is the first check. The more useful questions are whether the model uses the agreed units and alignment, captures the required features and documents the assumptions made where the original part was worn or incomplete.
Use this guide when agreeing deliverables with a scanning provider and when reviewing the completed package. Our reverse engineering service covers the wider reconstruction process; this article focuses on accepting its output.
Agree the acceptance brief before capture
Write down what happens after the model is delivered. A visual archive, an inspection reference, a replacement-part model and a design you intend to modify require different checks. Identify the features that matter to that use, such as mating faces, hole locations or interfaces with surrounding equipment.
Specify the requested deliverables and the information needed to evaluate them. Agree who will review the model, what evidence they need and how questions will be resolved. An acceptance checklist is strongest when the provider and recipient share it before reconstruction starts.
1. Verify identity, units and alignment
Confirm the part identifier and revision in the delivery record. Open the model in the receiving CAD system and check a known dimension rather than assuming the import scale is correct. Review orientation and the agreed origin or datum references.
Alignment matters when a deviation comparison is supplied. Ask which surfaces or datums were used and whether that alignment reflects the functional question being assessed. A model that looks centred in a viewer may still be positioned differently from the assembly that will use it.
2. Separate measured geometry from reconstruction decisions
A used part can contain wear, damage and manufacturing variation. Identify where the reconstructed model follows the measured surface and where a nominal shape has been restored or inferred. Keep those decisions in a review record.
Ask for inaccessible or incomplete features to be identified. A scan of visible surfaces does not establish hidden geometry, material grade or the original designer’s tolerances. Additional measurements or design inputs may be needed before a reconstructed part can support its intended use.
3. Check the critical features
| Review item | Evidence to agree |
|---|---|
| Mating surfaces and datums | How they were established and checked. |
| Holes and interfaces | Relevant dimensions or measurements for the intended fit. |
| Freeform surfaces | The agreed comparison between captured and reconstructed geometry. |
| Worn or damaged areas | Recorded reconstruction assumptions and reviewer decisions. |
| Uncaptured features | An explicit list of omissions and required follow-up information. |
Set acceptance limits for the intended application rather than borrowing a scanner’s advertised accuracy. If a comparison report is required, agree its coverage, alignment and interpretation with the provider. A colour map is useful only when the scale and comparison method are understood.
4. Test the requested kind of editability
A mesh, an imported solid and a native feature-based model support different workflows. If the brief requires editable sketches and features, test those in the agreed native application. Change a nominated dimension on a review copy and check that the intended features update.
A STEP file can exchange solid geometry without carrying the original feature history. Autodesk explains that generic imports such as STEP do not contain the original timeline information. Request the native feature-based file explicitly when that history is part of the agreed deliverable.
Our 3D design and CAD modelling services describe the modelling scope. Agree the receiving software and file version so the handover supports the way you will actually work.
5. Check the complete delivery package
- Open every agreed file format in the receiving workflow.
- Check that file names, part identity and revisions agree.
- Confirm the expected bodies, components and assembly references are present.
- Review agreed reports, measurements and reconstruction notes together.
- Record accepted items, questions and required revisions.
- Keep the reviewed issue identifiable for future changes.
Model acceptance and approval of a replacement part for service are separate decisions. Record who is responsible for the downstream engineering review and any additional verification required for the application.
Discussing a scan-to-CAD package
3Dmatic offers scan-to-CAD reverse engineering for obsolete parts, legacy components and end-use documentation, with Australia-wide service from our Brisbane facility. Send the part information, intended use, required outputs and critical interfaces when requesting 3D scanning.
Contact 3Dmatic with your existing CAD environment and acceptance requirements so the deliverables can be agreed before work starts.
