Fused deposition modelling (FDM) is the most widely used 3D printing process, and for functional prototypes, jigs, fixtures and one-off parts it is usually the fastest and most economical way to get a physical part in hand. It is also the process whose results depend most on how the part is designed and oriented. This guide explains how FDM works, which materials suit which jobs, what the process does well and badly, and how to decide between FDM and the other technologies we run.
How fused deposition modelling works
An FDM printer feeds a thermoplastic filament into a heated nozzle, melts it, and deposits it as a fine bead along a path generated from the 3D model. Each layer is drawn as an outline — the perimeter walls — and then filled with an internal pattern called infill. When a layer is complete the build plate drops, or the nozzle rises, by one layer height and the next layer is laid on top. The part grows layer by layer until it is complete.
FDM is also called fused filament fabrication (FFF). In the international terminology for additive manufacturing, ISO/ASTM 52900, it falls under the material extrusion category. The names all describe the same principle: a molten thread of plastic built up into a solid.
Because the nozzle cannot print onto thin air, steep overhangs and bridges need support structures, printed in the same or a soluble material and removed afterwards. Supports add material, print time and cleanup, and they leave marks on the surfaces they touch, which is why part orientation is the first decision in any FDM job.
FDM materials and when to use them
- PLA — easy to print, dimensionally stable and inexpensive. Ideal for form-and-fit prototypes, concept models and display parts. Brittle compared with engineering grades and softens at relatively low temperatures, so it is not a choice for parts that will sit in a hot vehicle or near equipment.
- PETG — tougher and more impact resistant than PLA, with good chemical resistance. A sensible default for functional prototypes, brackets, guards and enclosures.
- ABS and ASA — better heat resistance and toughness than PLA. ASA adds UV stability, so it is the usual choice for parts that will live outdoors.
- Nylon — tough, wear resistant and slightly flexible, suited to clips, hinges, gears and parts that see repeated load. It absorbs moisture, so it is dried before printing.
- Polycarbonate (PC) — high strength and heat resistance for demanding functional parts.
- TPU — flexible and rubber-like, for seals, gaskets, bumpers and grips.
- Carbon-fibre-filled grades — chopped carbon fibre in a base polymer such as nylon gives a stiffer, more dimensionally stable part. This is the usual answer when a printed jig, fixture or bracket needs to be high strength and stiff rather than simply tough.
The full list of materials we print in-house, across FDM and our other processes, is on our 3D printing services page.
Strength is directional
An FDM part is strong along its printed beads and weaker between layers, because the bond between one layer and the next is never quite as strong as the material itself. A bracket printed lying flat can carry much more load than the same bracket printed standing up, where the load tries to peel layers apart. This anisotropy is the single most important thing to understand about FDM for functional parts.
In practice, this means orienting the part so that the main loads run along the layers rather than across them, increasing the number of perimeter walls rather than relying on infill, and choosing infill density to suit the job — low for visual prototypes, higher for parts that will be loaded. When we quote a functional part, orientation is something we discuss with you rather than leave to the slicer’s default.
Designing for FDM
- Walls. Keep walls at or above the minimum thickness for the process — 0.8 mm is our floor for FDM — and thicker where the part carries load.
- Overhangs. Faces angled steeply away from vertical need support. Chamfers instead of flat overhangs, and teardrop or diamond-shaped horizontal holes, let many features print without it.
- Holes and fits. Printed holes come out slightly undersize. For accurate bores or press fits, print slightly undersize and drill or ream to size, or design in a heat-set insert for threads.
- Large flat areas. Long flat parts can warp as they cool, particularly in ABS and nylon. Ribs, fillets on corners and a split into smaller parts all help.
- Text and fine detail. Small embossed text and fine features are limited by the nozzle width; if detail matters, SLA is usually the better process.
These rules, and the equivalents for resin and powder processes, are covered in more depth in our guide to designing parts for 3D printing.
FDM, SLA, SLS or MJF?
We run all four technologies, and the right one depends on what the part has to do:
- Choose FDM for functional prototypes, jigs and fixtures, larger parts, engineering thermoplastics, and quick one-offs where speed and cost matter more than surface finish.
- Choose SLA (resin) when fine detail and a smooth surface matter — display models, small precise parts and master patterns.
- Choose SLS or MJF for nylon parts with near-uniform strength in every direction, complex internal geometry without supports, and batches of end-use parts. When you need tens or hundreds of the same part, read our guide to production 3D printing.
A common path is FDM for the first rounds of a design, when the shape is still changing every few days, then SLS or MJF once the design settles and the part is heading towards production. That is the workflow we support through rapid prototyping.
Finishing FDM parts
FDM parts show their layer lines. For functional parts that is usually acceptable as printed, after support removal. Where appearance matters, parts can be sanded, filled and painted, and threaded inserts, bushings and fasteners can be added after printing. Note the finish you need when you request a quote, because it changes the orientation and settings we choose.
What drives the cost of an FDM part
FDM quotes are driven by print time and material: the part’s volume, its height (because each layer takes time), the infill and wall settings needed for its function, the amount of support, the material, and any finishing. Because the inputs vary so much between parts, we quote each job individually from the model. Upload your STL, STEP or 3MF file through our quote upload and we will come back with a quote and a recommended process.
FDM printing in Brisbane, shipped Australia-wide
3Dmatic runs FDM printers alongside SLA, SLS and MJF at our facility in Milton, Brisbane. FDM and SLA prototypes typically ship within one to three business days, with rush printing available. For the terminology used across additive manufacturing, including the material extrusion category FDM belongs to, the ISO/ASTM 52900 vocabulary is available through Standards Australia.
