- Download 0
- File Size 0.00 KB
- File Count 1
- Create Date December 21, 2015
- Last Updated December 23, 2015
Cylinder Test should be used to fine tune your slicer and printer.
It is a 40mm x 10mm x 3mm base with 6 cylinders on it, they are alternate, one with a hole, one not,with the following sizes: 3mm, 3mm, 4mm, 4mm, 5mm, 5mm.
Once printed, the cylinders diameters sizes should match.
It is very small, so, if want to print it with PLA you need a very good cooling.